2019 Gehl R150 Skid Loader

Call for Price

R150 Skid Loader



Key Features
  • Height to Hinge Pin - Fully Raised (mm): 118.8" (3018)
  • Rated Operating Capacity (kg): 1,500 lbs. (680)
  • Gross Power (kW): 46.6 hp (34.7)
  • Overall Operating Height - Fully Raised: 152.6 in.
  • Height to Hinge Pin - Fully Raised: 118.8 in.
  • Overall Height to Top of ROPS: 76.7 in.
  • Overall Length with Bucket: 122.1 in.
  • Dump Angle at Full Height: 38 deg.
  • Dump Height: 93.7 in.
  • Dump Reach at Full Height: 22.8 in.
  • Rollback at Ground: 28 deg.
  • Rollback Angle at Full Height: 99 deg.
  • Seat to Ground Height: 35.6 in.
  • Wheelbase: 38.9 in.
  • Overall Width - Less Bucket A: 63.2 in.
  • Bucket Width: 61.5 in.
  • Ground Clearance to Chassis: 6.3 in.
  • Overall Length - Less Bucket: 93.9 in.
  • Departure Angle: 21 deg.
  • Clearance Circle - Front w/ Bucket: 73.6 in.
  • Clearance Circle - Front w/o Bucket: 45.4 in.
  • Clearance Circle - Rear: 57.7 in.
  • Standard Specification Tire Size: 10.00 x 16.5 HD
  • Make: Yanmar
  • Model: 4TNV88C-KMS Tier IV
  • Gross Power @ 2500 rpm: 46.6 hp
  • Net Power @ 2500 rpm: 44.5 hp
  • Maximum Torque: 107.8 ft.-lb. @ 1820
  • Displacement: 133.6 cu.in.
Hydraulic System
  • Auxiliary Hydraulics - Standard: 17 gpm
  • High-Flow Auxiliary Hydraulics - Option: N/A
  • Reservoir Capacity: 11 gal.
Electrical System
  • Battery: 12-volt
  • Starter: 12-volt
  • Alternator: 100-amp
  • Rated Operating Capacity: 1,500 lb.
  • Rated Operating Capacity with Optional Counterweight: 1,650 lb.
  • Fuel Tank: 16.5 gal.
  • Travel Speed - Maximum: 7.4 mph
  • Travel Speed with Two-Speed Option - Maximum: N/A
  • Operating Weight: 5,930 lb.
  • The demand for a Gehl 1,500 lbs. (680 kg) capacity skid loader has been fulfilled with the introduction of the R150.
  • 44.5 hp (33)
  • 107.8 ft.-lbs. (146)
  • 1,500 lbs. (680)
Operator's Cabin
  • The R150 features a new, state-of-the-art, fully-adjustable operator's cab.
  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Three control options include T-Bar and Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
Engine Features
  • The R150 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.
  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.
Hydraulics Features
  • The R135 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Attachment System
  • A full line of Edge attachments and accessories are designed specifically to fill operators' needs, making their R150 the most versatile machine on the job site. Popular attachments are listed below.
  • Bale Movers
  • Brooms
  • Grapples
  • Pallet Forks
  • Mower, Rotary
  • Skeleton Rock Bucket
  • Stump Grinders
  • Tree Puller/Grabbing Tool
Lift Arm
  • The R150 features an all-new low-profile lift arm.
  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
  • Excellent service access and quality components pair up to provide durable machines that are easy to maintain.
  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS
A - Overall width is dependent upon the amount of wheel offset. B - Per SAE J818, SAE J732, and ISO 14397 C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.



Engine Type
Engine Manufacturer
46.6 hp
Rated RPM
2500 rpm
Fuel Capacity
16.5 gal.


SAE Rated Operating Capacity
1,500 lb.
Max Ground Speed
7.4 mph
Tire Size
10.00 x 16.5 HD
122.1 in.
63.2 in.
76.7 in.
5,930 lb.
38.9 in.


Related Products