2019 Gehl R165 Skid Loader

Call for Price

R165 Skid Loader



Key Features
  • Height to Hinge Pin - Fully Raised (mm): 118.8" (3018)
  • Rated Operating Capacity (kg): 1,650 lbs. (748)
  • Gross Power (kW): 69.3 hp (51.7)
  • Overall Operating Height - Fully Raised: 152.6 in.
  • Height to Hinge Pin - Fully Raised: 118.8 in.
  • Overall Height to Top of ROPS: 76.7 in.
  • Overall Length with Bucket: 122.1 in.
  • Dump Angle at Full Height: 38 deg.
  • Dump Height: 93.7 in.
  • Dump Reach at Full Height: 22.8 in.
  • Rollback at Ground: 28 deg.
  • Rollback Angle at Full Height: 99 deg.
  • Seat to Ground Height: 35.6 in.
  • Wheelbase: 38.9 in.
  • Overall Width - Less Bucket A: 63.2 in.
  • Bucket Width: 61.5 in.
  • Ground Clearance to Chassis: 6.3 in.
  • Overall Length - Less Bucket: 93.9 in.
  • Departure Angle: 21 deg.
  • Clearance Circle - Front w/ Bucket: 73.6 in.
  • Clearance Circle - Front w/o Bucket: 45.4 in.
  • Clearance Circle - Rear: 57.7 in.
  • Standard Specification Tire Size: 10.00 x 16.5 HD
  • Make: Yanmar
  • Model: 4TNV98C-NMS2 Tier IV
  • Gross Power @ 2500 rpm: 69.3 hp
  • Net Power @ 2500 rpm: 68.4 hp
  • Maximum Torque: 178 ft.-lb. @ 1625
  • Displacement: 201.4 cu.in.
Hydraulic System
  • Auxiliary Hydraulics - Standard: 18.9 gpm
  • High-Flow Auxiliary Hydraulics - Option: Available
  • Reservoir Capacity: 11 gal.
Electrical System
  • Battery: 12-volt
  • Starter: 12-volt
  • Alternator: 100-amp
  • Rated Operating Capacity: 1,650 lb.
  • Rated Operating Capacity with Optional Counterweight: 1,800 lb.
  • Fuel Tank: 16.5 gal.
  • Travel Speed - Maximum: 7.8 mph
  • Travel Speed with Two-Speed Option - Maximum: N/A
  • Operating Weight: 6,165 lb.
  • The Gehl R165 rounds up the mid-frame skid loader class with top-notch performance.
  • 68.4 hp (51)
  • 178 ft.-lbs. (241)
  • 1,650 lbs. (748)
Operator's Cabin
  • The R165 features a new, state-of-the-art, fully-adjustable operator's cab.
  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Three control options include T-Bar, Joystick, and Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
Engine Features
  • The R165 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.
  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.
Hydraulics Features
  • The R165 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Attachment System
  • A full line of Edge attachments and accessories are designed specifically to fill operators' needs, making their R165 the most versatile machine on the job site. Popular attachments are listed below.
  • Bale Movers
  • Brooms
  • Grapples
  • Pallet Forks
  • Mower, Rotary
  • Skeleton Rock Bucket
  • Stump Grinders
  • Tree Puller/Grabbing Tool
Lift Arm
  • The R165 features an all-new low-profile lift arm.
  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
  • Excellent service access and quality components pair up to provide durable machines that are easy to maintain.
  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS
A - Overall width is dependent upon the amount of wheel offset. B - Per SAE J818, SAE J732, and ISO 14397 C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.



Engine Type
4TNV98C-NMS2 Tier IV
Engine Manufacturer
69.3 hp
Rated RPM
2500 rpm
Fuel Capacity
16.5 gal.


SAE Rated Operating Capacity
1,650 lb.
Max Ground Speed
7.8 mph
Tire Size
10.00 x 16.5 HD
122.1 in.
63.2 in.
76.7 in.
6,165 lb.
38.9 in.


Related Products